Posts Tagged ‘point’

the herringbone grass

my second strip of grass is going to be woven in a herringbone twill with a color-graduated warp. here’s the first bout (first 150 ends of the 300 ends i need) measured out on the warping board:

the high-tech little method below is what i use to keep track of the count. for every 10 ends, you wrap the yarn. i need 150, so 15 wraps will do me. the yellow thread at the very bottom is my guide for wrapping on the warping board… for instance, if i need 3.2 yards, i measure a guide thread to that length, figure out the path between pegs that works perfectly, then follow that path for my measuring.

next is a photo i took with a cool little iphone app named hipstamatic that my sister turned me on to. yeah, its fun, but i quickly realized it doesn’t serve the purpose of clear documentation very well. in any case, this is the second bout measured out, and you can see i’m beginning to tie it up with all the various knots that help keep it from tangling up after its taken off the warping board.

below is the first shot of green, and you can see the herringbone pattern and graduated colors of the warp. to get this pattern, i had to switch up the threading of the heddles from 1-2-3-4-1-2-3-4 (straight) to 1-2-3-4-3-2-1 (point). the new threading took me quite a while to get used to, and i spent a fair amount of time double- and triple-checking my work, making it go pretty slow.

then, to make matters worse, i hadn’t foreseen that, compared to a straight threading, double the amount of heddles would be needed on shafts 2 and 3, and about half as many on shafts 1 and 4. i noticed this when i was about 3/4 done threading the first bout, but waited til i had used up all the heddles on shafts 2 and 3 before moving some over from shafts 1 and 4. can you say HUGE pain the ass? it is WAY easier to move heddles when you don’t have over half of them threaded. blah.

this is my weavie helper, mahana, making sure the weft yarn on my shuttle doesn’t get out of hand.